Hi,

I downloaded the demo of Pocket Hack Master 4.20.043, but i cant use it :(
No problems with the installation, but when i selected speed in speed configuration menu and push the “test"buton it freesed completly.
I have to reset my ppc wit the softset button.

Specs:

T-Mobile MDA Vario II ( WM6 )
processor SC32442-400MHz
CF 2.0.7045.0

Sorry for the bad English

Ron M - 09 October 2007 07:33 AM

Hi,

I downloaded the demo of Pocket Hack Master 4.20.043, but i cant use it :(
No problems with the installation, but when i selected speed in speed configuration menu and push the “test"buton it freesed completly.
I have to reset my ppc wit the softset button.

Specs:

T-Mobile MDA Vario II ( WM6 )
processor SC32442-400MHz
CF 2.0.7045.0

Sorry for the bad English

Hi Ron,
What is the speed setting you attempted to test? I would also suggest you to try disabling built-in scaling (you can do that by going to Edit->Settings->Advanced) and see if that will improve stability.

Best regards,
Anton

I cant try nothing, when i selected several speeds and push the test button it freezed
And i have to reset it again.

And in the upper corners, settings and speed dousn’t work ( n/a )

http://i184.photobucket.com/albums/x70/ronnymes/display_3.jpg
http://i184.photobucket.com/albums/x70/ronnymes/display_2.jpg
http://i184.photobucket.com/albums/x70/ronnymes/display_1.jpg

Can this be solved, because i realy want to try this great app!! :D

Ron M - 10 October 2007 05:55 AM

Can this be solved, because i realy want to try this great app!! :D

Hi Ron,
You didn’t answer my question. What are the speed settings that you tried to use (and caused lock up)? Also did you try disabling built-in scaling? Thanks!

Hi Anton,

I have tried to try disabling built-in scaling, but nothing changed.
I cant set any speed, when i go to “change device speed"en press set nothing happends :(

Ron M - 11 October 2007 12:07 AM

Hi Anton,

I have tried to try disabling built-in scaling, but nothing changed.
I cant set any speed, when i go to “change device speed"en press set nothing happends :(

Hi Ron,
Pocket Hack Master will never work with *any* speed on a specific device. Only a small number of the available speed settings will run stable and this is the reason why you have the burn-in tests - to determine the stable speeds. The screenshot that you’ve sent starts with speeds of 450MHz. Which of the speed settings in the screenshot have you tested? Have you tried with the default speed? Does it makes a difference if the device is on A/C power or not?

I found the problem, my phone crashes when i set the speed to 450MHz
Not when i set it to 440Mhz

Edit: Oops crash with 440,430 and 420MHz it’s not working great:(

Ron M - 11 October 2007 01:58 AM

I found the problem, my phone crashes when i set the speed to 450MHz
Not when i set it to 440Mhz

Edit: Oops crash with 440,430 and 420MHz it’s not working great:(

Please try with the default setting and leave the device running for an hour or so to see if the issue is related to using a higher speed setting or not. If the device is stable running at the default (400MHz) speed, try increasing the speed in 10MHz steps. Also is OEM scaling disabled or not? Is the device running on A/C power or not?

Oke a little update, no problems in the “default setting” and no problems with 410MHz.
Just set it to 420 MHz, and also is OEM scaling disabled.
And just found a other problem, when I set my speed to 410 MHz or 420MHz and connect to my computer activesync disconnect :S

Anton Tomov - 11 October 2007 02:52 AM

Ron M - 11 October 2007 01:58 AM

Please try with the default setting and leave the device running for an hour or so to see if the issue is related to using a higher speed setting or not. If the device is stable running at the default (400MHz) speed, try increasing the speed in 10MHz steps. Also is OEM scaling disabled or not? Is the device running on A/C power or not?