If you wish to help our development team bring the new Pocket Hack Master v5 to you sooner you can do it by posting your working Pocket Hack Master v4 speed settings in the following format:

Device model and revision
OS version
Speed setting (as it is seen in the Speed configuration module of Pocket Hack Master) + comments

For example:

Device: HP iPAQ h4705, OS: WM2003SE
624MHz CPU, 208MHz bus, 104Mhz RAM, 104MHz LCD, T
20MHz CPU, 208MHz bus, 104Mhz RAM, 104MHz LCD, T

Thank you for helping us build a better product!

Please only post stable speed settings. Don’t forget to have a look at our Articles and guides section and read the Pocket Hack Master speed configuration guide.

I have posted a set on the main site btw it might be easier if you made link to forums on the home page as i struggled to find this page Regards Aaron

Here all my tested speeds:
HP IPAQ HX4700 WM6 Classic:
Please Note: Any speeds above stated top speed is not stable on the PXA270 C3.
Speed: 728 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 504 MIPS: 477 Memory: 532 Status: Pass
Speed: 663 Bus: 221 Ram: 104 LCD: 104 Turbo: T SI: 492 MIPS: 435 Memory: 548 Status: Pass
Speed: 624 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 464 MIPS: 410 Memory: 519 Status: Pass
Speed: 553 Bus: 221 Ram: 104 LCD: 104 Turbo: T SI: 447 MIPS: 362 Memory: 532 Status: Pass
Speed: 520 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 423 MIPS: 341 Memory: 504 Status: Pass
Speed: 442 Bus: 221 Ram: 104 LCD: 104 Turbo: T SI: 402 MIPS: 290 Memory: 513 Status: Pass
Speed: 416 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 381 MIPS: 273 Memory: 489 Status: Pass
Speed: 332 Bus: 221 Ram: 104 LCD: 104 Turbo: T SI: 361 MIPS: 217 Memory: 504 Status: Pass
Speed: 312 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 340 MIPS: 204 Memory: 476 Status: Pass
Speed: 221 Bus: 221 Ram: 104 LCD: 104 Turbo: T SI: 286 MIPS: 145 Memory: 427 Status: Pass
Speed: 208 Bus: 208 Ram: 104 LCD: 104 Turbo: T SI: 275 MIPS: 136 Memory: 414 Status: Pass
Speed: 104 Bus: 104 Ram: 052 LCD: 052 Turbo: T SI: 137 MIPS: 068 Memory: 206 Status: Pass

Hope you find these Useful,
Regards Aaron

Hello,
We will put a link to the forums on our index page this weekend. The reason for not doing that until now was to test whether the forums were configured and working correctly. Thanks for reminding me of that

By the way we have almost finished configuring our new Wiki page that will enable users post their Pocket Hack Master settings there. That way the entire Pocket Hack Master community should be able to participate in building a complete configuration help system for virtually all devices currently available.

hi,

i cannot provide settings for the htc polaris (touch cruise/xda orbit 2) because theres no app yet to overclock,

but i saw that anton wants to support the qualcomm MSM7x00 chipsets. the only thing i know and its helping hopefully:

the chips run stable at 528 Mhz

see here: http://www.pdadb.net/index.php?m=specs&id=998
and here: http://www.pdadb.net/index.php?m=specs&id=790

i hope it was any usefull,
btw .. will there be a beta for testing the qualcomm compatible Hack Master?? if yes, when?

bb