Wizcode

HTC Touch WM6

2008-01-21T11:17:25-08:00

Hi, are there near term plans to offer support for the Qualcomm MSM7500, 400 MHz processor of the HTC touch in Hack Master?
It says “...does not support your processor” and the Speed Configuration module is not there.
And Handago list my device as a compatible one. :(
I can’t find any over clocking software that support my device.

Mio p550m / samsung s3c2400a

2009-12-15T05:10:33-08:00

Hello
I install Pocket Hack Master on my Mio p550m which windows mobile 5, because i want to downclock my samsung processor for save battery life. I try change speed witch option: speed configuration. Test process for ~379 MHz (original 400 MHz) was finish which successfull. After that the screen start blinking and finish on black so i must restart pda. How i fix this irregularity? Maybe this device in no support or maybe i must add manual speed only which voltage change? thanks for help.

Samsung 2443c Support?

2009-11-28T12:15:36-08:00

Hi,

I recently purchased a Ciphone C6 from China which contains the Samsung 2443c chipset. It is currently not supported by PHM, bummer :(

Any hope that a patch will be released with this support made available. Would love to use this product.

Thanks, Mike

S3C2442B support?

2007-11-07T14:27:17-08:00

Hi, are there near term plans to offer support for the Samsung S3C2442B in Hack Master?

Thanks,

-DavidM

samsung sgh-i900

2009-05-02T07:40:50-08:00

hi
I have just bought PHM and when I run it I get the error:
Warning! This version of Pocket Hack Master does not suport the processor used in your device. For more information please visit .....
My i900 has the ARM920T PXA312 processor. Does PHM support this processor.

not working on HtC touch pro

2009-01-21T21:41:40-08:00

Anton
hi just reinstalled Pocket Hack Master onto my HTC touch pro and it dosent seem to give me any varible speeds in “"Scale Configeration” or any thing registering at all to test.
is it that it just dosent work with Htc touch pro Raphael build ?

Can one Make PocketHackMaster Ignore crashed resets? & TaskList Hide

2009-03-14T14:23:46-08:00

I got the two speeds I need and as such I do NOT do scaling auto, but manually - 127 = normal and 190 for Music, etc… - I also have it to autostart and minimize on startup, however if I push the reset button, etc.. and many many times it does NOT auto-set the 127 default speed back… Is there a way to fix this issue or add an option in the NEAR future and I hope soon?

Also can there if possible be an ability to hide it from showing up in the list as I have vbar and if I close out all apps it closes too - the firewall I have on it doesn’t show up on the list of open apps which I like...Is this all possible?

space reclaimer + Pockethack master + ?

2009-03-12T16:03:01-08:00

I have space reclaimer to stop all apps and pockethackmaster to startup on reset - pockethackmaster first starts up fine - then space reclaimer of which closes pockethackmaster - all I am wondering is if pockethackmaster HAS TO BE always minimized to set/keep the speed I chose in the program or is there any program I can use to test to see if it set the speed correctly and it is in use?

Oh also is there any way to EDIT the manual settings and or export them to a backup? if NOT then could this be an option on a newer release..

CPU load/history in top bar

2008-10-29T04:43:06-08:00

Hi, did you ever think, that some CPU usage history graph in today screen or in top bar with current cpu MHz will be handy? Like in XCPUScalar? Thx

Support for the ARM920T PXA311 in the Samsung Epix

2009-01-28T14:22:36-08:00

I would like to request support...or wondering if it is already planned for the Arm920T PXA311 that is in the Samsung Epix Windows 6.1 touch/key phone. I am a registered user of Pocket Hack (bought it for my old iPAQ rx3115) and would like to use it now instead on the Epix but it states on install that the processor is not supported. I am just hoping it is a matter of time and not a technical issue...this is a fairly recent device.

It also exhibits the 320x320 issue in Pocket Mechanic (and assume other Wizcode apps)...but see that has already been addressed and is going to be fixed in an upcoming release.

Thanks for your fine products!